Supported Media
1 Gbps Ports
- 1000BASE-LX
- 1000BASE-T (limited availability)
10 Gbps Ports
- 10GBASE-LR – Default for 10 Gbps Ports
- 10GBASE-BR – Bidirectional on single fibre
- 10GBASE-ER – Up to 40 km
- 10GBASE-DWDM
100 Gbps Ports
- 100GBASE-LR4 – Default for 100 Gbps ports
- 100GBASE-LR1 – 100GBASE-LR single lambda
- 100GBASE-BX10 – Bidirectional on single fibre
The data centres in which VANIX operates have standardized on single-mode-fibre (SMF).
Transceiver Specifications
10GBASE-LR media utilizes 1330nm transceivers with -5dBm transmit power and a -15dBm minimum receive sensitivity. 10GBASE-LR uses separate receive and transmit fibres.
10GBASE-BX media utilizes 1330nm TX, 1270nm RX bi-directional single fibre transceivers with -4dBm transmit power and -14dBm receive sensitivity (up to 20km range). Many network vendors refer to this as a Downstream transceiver. Participants will need an Upstream transceiver with 1270nm TX, 1330nm RX. A single fibre cross-connect, which contains two fibres, can be split to connect to two ports using 10GBASE-BX. Technically, this media type should be called 10GBASE-BR as it uses 64b/66b just like 10GBASE-LR, but most vendors refer to it as 10GBASE-BX.
10GBASE-ER media utilizes 1550nm transceivers with 0dBm transmit power and -16dBm receive sensitivity (up to 40km range).
10GBASE-DWDM media utilizes 100 Ghz grid (Ch 21 to Ch 60) DWDM transceivers with 0dBm transmit power and -23dBm receive sensitivity (up to 80km range). Please specify your requested channel during the order process.
100GBASE-LR1 media utilizes a single wavelength (lambda) over duplex fibre. LR1 is a good choice for participants that have 400 Gbps routers, and intend to use a 4 x 100 Gbps breakout transceiver (400GBASE-PLR4).
100GBASE-BX10 media utilizes 1331nm TX, 1271nm RX bi-directional single fibre transmission with an approximate 0dBm transmit power and -8dBm receive sensitivity (up to 10km range). Many vendors refer to this as a Downstream transceiver. Participants will need an Upstream transceiver 1271nm TX, 1331nm RX. A single fibre cross-connect using bi-directional transceivers can be split to connect to two different VANIX ports.
Do you have a technical question for VANIX?
If you have any questions about VANIX Ethernet physical layer support, please contact us.